Decorating An Outdoor Fish Pond

I must admit that in the slightly over a decade that I have been decorating aquarium, I have only actually decorated less than half a dozen outdoor fish ponds. It’s not that I do not have the confidence in doing so. It is just that in most cases, outdoor fish pond design and decorating has always fallen into the area of landscape designers.

A fish pond poses its own set of considerations which are vastly different from an aquarium. Therefore, decorating it must be planned and handled differently as well.

The first issue of a fish pond is the visual perspective. An aquarium will be viewed from the front and sides. Therefore, when designing an aquarium theme, you would place ornaments and arrange them for this perspective. However, fish ponds are viewed from the top. The ornaments that you place inside the pond needs to be those that are visually pleasing when viewed from above. Placing an ornament that has intricate details on its side defeats any decorative purpose.

The second factor also has to do with the visual aspect. Depending on how deep your pond is, placing low lying decoration might not be a good idea. This is because the deeper the pond is, the less light the bottom gets and having decor lying low at the bottom would make it almost invisible when viewed from outside the water. This is one of the reasons why most fond designers incorporate decorative items on the outside of the pond, rather than submerged inside.

One last issue would be the weather. Unlike an aquarium which is placed in the comfort of your home, outdoor ponds are exposed to the fury of the weather. The ornaments that your choose to decorate them must be created to withstand harsh natural conditions. These include the scorching sun, the pouring rain and in certain regions, freezing cold. Decor that are not designed for this onslaught would easily fade and crack when exposed to it.

Tips On Designing An Outdoor Fish Pond

The key here is to first keep in mind the three major considerations above. Make your selection of each individual item based on these factors.

Pick out a theme that is suitable for an outdoor theme. Some really cool theme ideas include Fairies and Mermaids. There are dozen of such ornaments that you could get that have been designed specifically for an outdoor pond. You could also use figurines of animals that can be found by or in the water such Turtles, Herons, Dolphins, Crocodiles and Hippos to name a few.

An awesome idea is to try to get ornaments that actually look like they are interacting with the water. This would include such figurines as Fishermen, Little Kids Tinkling Into The Water or Maidens With Vases. Many of these have pumps that flow the water through them and pours out from them back into the pond.

Apart from rocks to provide cover for the fish, you really do not need any submerged decor. Having little or no decorative items inside the water will make it a whole lot easier to clean.

Incorporating Aquatic Plants Into Your Pond Design

Being outdoors creates an ideal condition for plants. The plants would receive sufficient sunlight and will thrive in the water. Also, placing plants inside the pond has a lot more benefits other than just being visually pleasing. The floating plants which live on the surface of the water provides shade and cover for the fish. This is extremely important especially when you have fry that have to hide away from the adult fish.

The plants also provides competition against algae growth. By competing for sunlight and nutrients in the pond, these aquatic plants would starve the algae and limit their growth.

Facts About Duck Boxes

One of the best ways to attract wild ducks is through the use of a duck box. The use of the box is particularly to boost the number of ducks in several local populations. Before, wood ducks are abundant in several parts of the United States. However, due to constant hunting their numbers gradually declined. Constant hunting and land reclamations have nearly caused the extinction of this type of bird. Now, because of the changes in the law the wood ducks have increased in numbers. Wild ducks often use the boxes as homes and they often lay eggs on such boxes.

The Importance of the Boxes

The importance of the boxes is that most wood ducks and other duck species usually make it their home. Yes, duck females typically live in wetlands and in wooden boxes. Because of their constant migration, they require homes in various places. When a prospective wooden box is found, the wood duck will often inspect the box and check its contents. Wood ducks often pick their boxes according to their size and shape. Of course, they will also pick a home which is away from any predators. Once they have selected a suitable box for them they will often lay eggs there. The eggs will hatch and then they will then migrate to another location. Basically, a duck box is effective increasing the population of both wooden ducks and other species.

Picking the Right Location for a box

In order to pick the right location for a box, several factors should be strictly considered. One of which is that the box should be away from any known predator which might endanger the tenants of the box. Therefore, the box should have wooden posts and several metal cables in order to prevent any predators from eating the birds. The box should also be found near a suitable habitat and it should not be very far. Usually, wild ducks prefer homes which are a hundred yards away from their habitat. The reason for which is that they require the fertile wetlands for food and for looking for a partner. The shallow wetlands allow them to look for insects and small fishes which in turn becomes their meal.

Using the right materials

Another important factor when making a duck box is to choose the right wood for the job. The ideal type of wood is the rough cut and unfinished lumber since the ducklings have the sharp claws to create an exit hole. Metal or plastic boxes are not ideal since they might impede the ducklings from exiting the structure. At least a couple of wood shavings should also be inserted on the box so that the ducks will have a nest. Once the females see the wood shavings, they will usually use it in order to incubate their eggs. After the winter season, the boxes should have a new batch of wood shavings since the old batch will be damaged by the harsh weather brought about by the winter cold.

Building a Fence for a Horse Riding Arena

For our new horse riding arena we chose to build a full perimeter fence. This will be consisting of wood posts and boards that would match our out buildings and horse sheds. We used 8 inch posts, and 2 x 6 boards 16 feet long. Our posts were spaced 8 feet apart, this enabled us to fasten each 2 x 6 board to three posts. This was to reduce the chance of the 2 x 6 boards warping and twisting, as well as making the fence stronger. The position of all the posts, including gateways were staked out prior to constructing the arena fence. Our arena will be 200 x 100 feet, with a 12 foot gate at each end. We began by tying a string to a corner stake and pulling it 200 feet to the next corner stake on the long side of the arena. After pulling the string tight to ensure that it was a perfectly straight-line, we tied it tightly to the second stake. A stake for each post was then placed along the string line at 8 foot intervals to complete the first side of our perimeter fence.

To layout the second side of our riding arena fence we measured 100 feet from the corner stake and put a stake in the ground for the next corner. To make sure that the corners are perfect 90° angles. We could have used a construction calculator to do the math. Instead we made our own 90 degree angle with, a known math solution, the old tried and tested method of the 3, 4, 5 right-triangle solution. A triangle that has three sides where one is 3 feet long, another is 4 feet and the third leg is 5 feet long creates a right triangle. The intersection of the 3 foot and 4 foot leg create a perfect 90 degree angle. Any multiples of these dimensions also work; 6, 8, 10 or 12, 16, and 20 are also combinations that yield a perfect 90 degree angle. To make our corner, we used a measurement of 100 feet to the next corner, 75 feet back down our staked fence line, and 125 feet for our diagonal measurement. Where the 100 foot measurement, and the 125 foot measurement intersected we placed our next corner stake. After pulling a string to make sure of a straight-line, we placed 11 stakes at 8 foot intervals along the string. This made a total distance of 88 feet. The remaining 12 feet is where our gate went. We chose to use a 12 foot gate at each end of our arena for two reasons. First this is a good-sized opening for getting machinery into the arena to maintain the riding surface. And secondly, 12 feet gave us an even measurement for our 8 foot post spacing on the 100 foot side of the arena.

To layout and stake the third side of our arena perimeter fence, we measured 200 feet and placed the last corner stake, taking care to have perfect 90° angles on our corners using the 3, 4, 5 right-triangle solution. After pulling a straight string line we placed our post stakes every 8 feet completing the layout of the third side. We laid out the last side of the arena with 11 stakes spaced 8 feet apart for the posts and another 12 foot opening for a gate.

After all of the perimeter post positions had been staked, we used a post hole digger on a machine to drill the holes in the ground for our posts. Our posts were 8 feet long, and our holes were drilled 2 feet deep, so that we would have 6 feet of post sticking out of the ground when finished. We used a string line and level to make sure all of our posts were straight and uniform before tamping and watering the ground around them for compaction.

When all of the perimeter posts had been tamped into place, we then began fastening our 2 x 6 boards to the posts for the railings. We chose to use two railings one at 30 inches to the top, and another at 60 inches to the top of railing. Before fastening the railings to the posts, we pulled a string line tightly down the row of posts at 30 inches high and made a mark on each post were the top of the bottom railing will be, we also made another mark at 60 inches for the top of the top rail. Next we used clamps to clamp our 2 x 6 railing to the posts taking care to line up with our mark, we had made previously. The railings will be attached to the posts using 5/16 by 3 inch long lag bolts with a large flat washer. To do this, we first drilled two holes slightly smaller than 5/16 through the railing and into the post. We chose to use two bolts to fasten our railings to each post, therefore the two bolt holes were drilled in the railings 1 1/2 inches from the edge of the 2 x 6. We did not want our bolt heads to protrude out of the railing, so we drilled the two holes in the railing slightly larger than the washer 1/2″ deep to countersink the washer and head of the lag bolt. After inserting the bolts into the holes and tightening them up, the clamps were then removed and the process was repeated for the next railing.

After attaching all of the railings to the posts, we then hung the two 12 foot gates on each end of our riding arena. We purchased two steel gate kits that came with hinges and a latch on them ready for installation. To hang the gates was a simple matter of drilling two holes through the gateposts at the correct height. The final step to completing our riding arena was to paint all of the wood railings and posts with a good outdoor protective paint that would preserve and protect the wood, as well as matching the color on our existing horse sheds.

Feeding Birds – What Type of Feeder Should You Use?

Wild birds are surely capable of feeding themselves off the land. However, when weather extremes make things tougher for them, having an additional source of food or water can be a life saver.

You may see flocks of red-winged blackbirds descend on your backyard seed feeder before they leave their northern range. Feeders can help prepare wild birds for their long journey of migration. You may live on the southwest coast of North America and see Anna’s Hummingbirds at your nectar feeder in the winter. Wherever you live, your wild birds can certainly use a helping hand from time to time throughout the year.

Wild birds will come to feed at many different types of feeders depending on the type of feeder they prefer. Some birds prefer most to forage from the ground or platform feeders, as do cardinals. Others as this male house finch will feed from the ground, platform feeders, tube feeders, and seed feeders readily all as one. Others still, like the goldfinch prefer thistle seed from open fields or from tube feeders.

Platform feeders will attract Chipping Sparrows, Cardinals, American Tree Sparrows, Towhees, Rose-Breasted Grosbeak, Blue Grosbeak, Song Sparrows, White-Throated Sparrows, Meadowlarks, Evening Grosbeak, Blue Jays, Magpies, Steller’s Jays, Yellow-Bellied Sapsuckers, Downy Woodpeckers, Mourning Doves, Black-Capped Chickadee, Gray Catbirds, Eastern Bluebirds, Pine Grosbeak, Northern Mockingbirds, and others.

Platform feeders can be as simple as a piece of wood on your picnic table, or your picnic table itself. However, that can be quite messy. Another option would be to get a 4×4 post and nail a wood plank sized 12 x 12 or larger to the top of the post. Drill holes through the wood plank so that water does not just sit as a puddle. To prevent most of the food pieces from just falling off to the ground, you may take some thin wood trimming and nail it to the border of the wood plank. Nailing the wood trim to surround the border of the wood plank will help keep most of the nuts, fruit, suet, or bread from just falling off. Although, having some of the scraps fall to the ground is good, as this will also attract other birds that will like to forage on the ground most often.

Suet Feeders attract: Blue Jays, Yellow-Bellied Sapsuckers, Downy Woodpeckers, Hairy Woodpeckers, Northern Flickers, Black-Capped Chickadee, Tufted Titmouse, Nuthatch, Eastern Bluebirds, Northern Mockingbirds, Brown Creepers, Gray Catbirds, Wrens, Steller’s Jays, and more.

A suet feeder is typically made of wire mesh, and easily hung from a tree branch, hanger, or pole.

Fruit feeders/ Fruit & Jelly Feeders attract Orioles, Western Tanagers, Scarlet Tanagers, and Rose-Breasted Grosbeak.

Fruit feeders will typically utilize cups for jelly as in the feeder above, with side pins for sticking orange halves.

Peanut Feeders attract: Indigo Bunting, Blue Jays, Woodpeckers, Nuthatch, Eastern Bluebirds, and others.

Hummingbird or Sugar Water Feeders attract more than Hummingbirds. They also will attract Bullock’s Orioles, Baltimore Orioles, Western Tanagers, and House Finch among others.

Seed Feeders attract: Painted Bunting, Purple Finch, American Goldfinch, Pine Siskin, Grosbeak, House Sparrows, Juncos, Common Redpoll, Red Crossbill, Tree Sparrows, and many more.

Caring for Chubby Frogs (Asian Painted Frogs)

About Chubby Frogs:

The Chubby Frog got its nickname because of its plump, round body. It is also called the Asian Painted Frog because of its origin and the fact that it has two stripes on its back that are outlined in black or dark brown, giving it a “painted” appearance. The frog’s scientific name is Kaloula pulchra. All the Kaloula pulchra frogs in the pet trade are wild-caught from their various natural habitats which include leafy forests, rice fields, and even small towns. During the daytime hours, these frogs stay hidden underneath leaves and debris. They emerge for feeding in the evening.

Choosing a Frog:

Make sure you pick a healthy Chubby Frog at the pet store. For one, make sure the frog is actually chubby! Its body should be full and round. If the frog is underweight, you’ll see bones sticking out. Examine the eyes for clarity, and the skin for open wounds or abrasions. If you go to the pet shop during the day, the frog should be hiding. If you find it out in the open, that could be a sign of illness. Of course, it could also mean that somebody else was recently examining it. Be sure to ask the pet store owner if someone was recently handling the frog. Unless the frog is disturbed or ill, it will remain hidden during the day.

Chubby Frog Housing:

A 10- to 15-gallon enclosure will give your frog the amount of room that it needs. If you’d like to house 2 frogs, a 20-gallon tank is recommended. Be sure to use a terrarium with a tight, screen lid secure enough to prevent escapes. These frogs are great climbers!

The bottom of the enclosure needs to be layered with substrate, at least 2″ deep for burrowing. Steer clear of gravel, wood chips, sand, and vermiculite or perlite. The best substrates for your Chubby include peat moss / potting soil mixes, eco earth, organic mulch, and coconut fiber.

Furnish the terrarium with potted plants, driftwood, and other items that the frog can use for hiding or climbing. To prevent the frog from uprooting plants while burrowing, you may wish to keep live plants planted in pots rather than directly in the substrate.

Your frog will prefer the temperature to be between 70 and 80 degrees Fahrenheit. Use a heat lamp or under-tank heater to maintain the temperature. Aim for about 80 degrees F. during the day, and no cooler than 70 degrees F. at night.

A few times per week, mist the inside of the tank with water. Humidity is important for your frog. The water MUST be 100% chlorine-FREE!

NOTE: Day / Night Difference – Your frog needs to be able to tell day from night. For this reason, an under-tank heater may be better than a heat lamp. That way, you can maintain the temperature at night without having the bright light on in the frog’s face. Also, you should keep the frog’s terrarium in a location where it can naturally experience light during the day and dark at night. Try to keep it in a room that will not have lights turned on often at night.

Fish Tank Heater Guide

The temperature of the fish tank is absolutely critical for the well-being of the species of fish inhabiting it. Unlike human beings and warm-blooded pets, species of fish tend to not generate their unique physique heat. They must rely on the temperature of the water to regulate their internal temperature. The aquarium water heater information below covers everything you need to understand regarding heating units, and will cover types of fish tank heaters, sizes, and placement of the heater.

Deciding on the type of fish tank heater to use with your aquarium tank isn’t really difficult as long as you recognize the variances between a number of fish tank heaters. There are a number of basic aquarium tank heating units; immersible heating units, submersible heating units, substrate heating units, and filtration system heating units. Depending on the size of your tank and additional components such as a sump, you may have to decide what will work best for your aquarium.

Figuring out which kind of water heater to acquire for your aquarium tank is just the main picture. Heaters occur in several sizes and power ratings. Are you still undecided as to what exact size water heater you need for your aquarium tank? There exists a way to analyze the proper sizing water heater, using the size of your tank and desired temperature. Once you know what size heater you need and the type of heater, you are ready to select the brand. Please read reviews online or on the fish tank heater site at the end of the article to see what heaters are worth buying.

Numerous species of fish that want warmed-up water for ideal health and fitness (such as the Betta) are held in small tanks or containers. Regrettably, mini tanks and smaller types of fish tanks could be a difficult task to heat adequately. In past times, a couple of years maybe, a range of small heating units were introduced towards the aquarium tank market place. Have a look at these types heating units specifically made for mini aquariums if you own a tank less than 10 gallons in volume. They are typically marketed as “nano” or “pico” heaters, and get the job done fairly well without the risk of over-heating the tank with a full sized fish tank heater.

Once you purchase a fish tank heater, the next step is deciding where to place it in the tank. Should the item become located in the middle or off to a side? Can you route the current more efficiently? Will it possibly make a difference? There are many simple, although crucial, tips for proper water heater placement. A little trial and error also goes a long way. You may want to invest in a thermometer probe to accurately monitor the aquarium temperature.

Even under great conditions, issues can certainly occur. Essentially the most frequent undesired event is usually a water heater that decides to break without warning. In the event that you are worried about this happening, you must think of utilizing a water heater safeguard. You’ll want to have it when you need it. You might as well throw it in the cart when you buy the heater.

Another difficult fish tank heater task is usually through the summer time whenever aquarium tank water temperatures increase along with ambient temperature. At times, turning off the fish tank heater isn’t really ample to stop hazardously excessive water temperatures, and extra measures are needed and keep the species of fish cool. One can add cups of cold water, but that is quite time consuming. Chillers exist and are essentially the opposite of the heater. If you’re roughly in the middle hemisphere, you might as well throw a chiller in the cart with your fish tank heater and heater safeguard.

From the wintertime, the opposite issue can occur. This is especially true should your water heater not be able to provide enough heat during the winter time of the year, and measures should be taken in order to keep the species of fish warm. Either a stronger heater, or ideally a second heater should be considered as well. Two heaters will ensure the tank doesn’t get too out of line should one fail. Even if your 300-Watt heater is twice as strong as a 150-Watt heater, should it decide not to turn on then it becomes a 0-Watt heater. Might as well throw a second heater in the cart.

Hopefully after reading this you will have a better idea of what type of fish tank heater to purchase. Once you have an ideal system in place, you won’t have to worry because you know the aquarium temperature will be constant and if something were to fail there are safeguards in place to prevent disaster.

Cool Aquarium Decor For Under $10

Almost anyone can keep a fish tank. What could be so difficult about filling a tank with water and dropping some fish inside? Well, there is actually more to it than that. You will have to replicate the environment from where the fish came from as best as you can. This would mean proper water filtration, the right temperature for your fish as well as the perfect water chemical balance.

But this alone would not ensure that your fish will be healthy and happy. Another important thing which a lot of new as well as experienced hobbyists fail to consider is tank decoration. If you think about it, the fish would probably never know that the lump of resin you dumped in with it is meant to represent a mermaid but aquarium decor do benefit the fish in a number of other ways. The decor create a boundary of sorts within the confines of the tank and this becomes especially important to the territorial fish. Also, the holes and gaps in the tank decor act as little caves for the fish to hide away in when they feel a need.

However, tank ornaments, especially the really cool intricate ones, can be expensive. All is not lost. There are still loads of other tank ornaments that we can get which will not burn a hole in your pocket. In this lens, we’ll look at some of the ornaments that are really cool which you can get for under $10.

Artificial Corals

Artificial corals are a good place to look for inexpensive yet beautiful tank decor. It is fairly easy to find corals and artificial anemone online and in the pet stores. The cool thing about it is that you do not have to worry about what items to match with what. This is because even in nature, there really is no proper matching. You will see corals and anemone of all shapes and colors side by side. You don’t even have to worry about positioning or proper arrangements. Just place them however you like.

A cool thing to do is to have a background of an underwater scene or a coral reef scene. By placing your artificial corals in front of it, it does create a 3D like effect in the tank, making it look like a vast ocean.

Plain Rocks And Aquatic Plants

This is another relatively cheap but excellent alternative when decorating your aquarium. And it really does not take much effort or creativity. All you need to do is arrange some rocks into a formation and place aquatic plants around it. A good idea is to arrange the rocks such that it provides the fish with at least a small cave. As for the plants, try arranging them in a cascading effect, with the tall ones at the back and the shorter ones in the front. And avoid blocking the rocks too much cos they are part of your decor.

For the background, you could use the same ones that I recommended for the Artificial Corals decor just now.

Do It Yourself Decor

One last suggestion is to just find stuff from around your house that you could use as tank ornaments. This can be almost anything such as unwanted china, old pottery and trinkets. But not everything can be put in the tank with fish. Avoid anything metal. They will oxidize and pollute the water. Also don’t have anything that is hand painted without a coat of varnish. The paint will leak into the water and poison it.

General Considerations When Raising Tadpoles

Frogs are fascinating amphibians which are increasingly being kept as pets by enthusiastic herpetoculturists. Caring for frogs in captivity naturally results in a desire to have a go at breeding them, providing other frog-keepers with captive born stock, making some money to recover the costs of buying the animals and equipment, and an amazing opportunity of observing the amphibian life cycle from egg to frog. Any successful frog breeding project must include research about, and a plan of how to raise the tadpoles.

Tadpoles are the larval form of frogs. The vast majority of amphibian species reproduce through externally developing eggs which result in aquatic tadpoles, and after a period of growth, undergo metamorphosis, which completely changes their morphology to froglets, which can live on both land and water. Because of the huge variety of types of frog that are bred in captivity, this article will not be able to provide detailed information about raising tadpoles of a specific species, but will discuss some universal considerations that are applicable to all tadpoles.

The vast majority of frog species start their life cycle as complete aquatic larvae, making the care of tadpoles is not dissimilar to that of aquarium fish and fish fry. Once the eggs are laid by the female they should be removed from the frog terrarium and placed in their own aquarium. The water in which the tadpoles will be reared must be dechlorinated, the easiest way to achieve that is by treating tap water with an aquarium fish water conditioner, which removes chlorines and chloramines. The water should be maintained at a temperature that is specific for the particular species of frog that you are breading, which might necessitate adding a heater to the aquarium.

It is best not to use gravel in the tadpole rearing tank, since it makes cleaning easier. Initially no filtration or aeration should be used, since the tiny tadpoles will find it hard to swim against the currents created and could be sucked up into the filter. It is easiest to start with a low water level, and gradually increase it by adding more dechlorinated water at the same temperature as the tank water, since water changes with tiny tadpoles are difficult. As the tadpoles grow in size and the rearing tank becomes filled with water, daily water changes of 50% of the water will become necessary to keep the water quality high. Gentle aeration with an airstone and an air pump should be added about 2 weeks after spawning. Biological filtration may be added using a simple sponge box filter driven by an air pump.

Feeding strategies for the tadpoles will depend on their species, and should be researched for each species that is raised. During the first few days after hatching, the embryos will not require food, since they will be absorbing their yolk sac. It is however preferable to start feeding too early, rather than too late, since starvation at this early stage in development can seriously delay growth and might lead to developmental abnormalities. Many frog species are herbivorous during their larval stages and can be fed on lettuce and other greens, which should be blanched under boiling water to soften them. Tadpoles of the African clawed frog are basically filter feeders and should be raised on infusoria, or powdered algae tablets. Providing some light over the tadpole tank will encourage the growth of algae and green water, providing a non-polluting and self-sustaining source of food. Carnivorous tadpoles such as those of the horned frogs, are perhaps the most difficult to feed, since they need live food and would probably do best on fish fry. They are often cannibalistic and will require isolating as they grow.

Choosing Among Several Reptile Cages and Terrariums

If you’re the type of pet owner who loves to raise cold-blooded animals as a hobby, then you should be familiar with the equipments that these species need, including a convenient home. However, with so many of these reptile cages and terrariums available in the market today, it will be harder for you to settle on a single brand, also considering that these products are often equipped with features, which satisfy a specific function. Fortunately, there are some helpful hints by which you can quickly go in and out of the store in record time, while still getting that prized furniture.

1. Reptile cages and terrariums come in a variety of shapes and sizes, and thus, you are required to take note of the body measurements of your pets, as well as its ability to crawl and climb from one place to another. If you feel like your pal needs more room to stretch its legs, or exercise its muscles, then a long vivarium should accommodate these needs. However, if your pal loves to attach itself to the glass walls, adjustments to the heights are required.

2. An ideal terrarium should already be equipped with a special fixture, where you can install your reptile lighting. It doesn’t matter whether the equipment is meant for fluorescent strips or small bulbs. What’s important is that there is an allocated space to accommodate these vital devices. If you’re having problems with locating these cages, then you’d be surprised to learn that you’re more likely to find the perfect pet home in the aquarium section of the store.

3. Your reptile supplies should also fit inside the terrarium. While this is one of the factors, which should be at the top of your priority list, it is surprising to know that many owners overlook this fact, resulting to an overcrowded home or a messy interior decoration.

4. Common reptile supplies, such as the terrarium, are always available in the market with a wide range in price that is meant to satisfy everyone’s budget. However, when picking the perfect home, you should also take the time to check every aspect of the house, without looking at the expenses. This way, you know that your decision will not be influenced by your savings. Instead, you will be more driven to settle on a product based on its quality.

Considering these few tips is sure to guarantee that you will bring home the perfect terrarium for your beloved friends.

Exotic Birds: All About Purple Martin Housing

Purple Martins are the largest breed of swallows that nest typically in North America. These beautiful and exotic birds mostly depend on man-made or artificial housing like wood and aluminum houses mounted on poles or natural and artificial bird house gourds.

If you are thinking of being a host to these species of exotic birds you will not be disappointed. Setting up individual houses or even a small colony in an open space near your house like the back yard can be a highly rewarding experience.

Here are some of the different housing options that Purple martins prefer to nest in.

Aluminum Houses:

As far as housing Purple martins go, selecting the right size house is essential. Aluminum houses for martins are not only heavy duty and durable but also have openings on all four corners. Providing spacious housing like this for the birds to perch on not only increases the potential of occupancy by them but also does away with territorial issues.

Wood Houses:

Many Martin hobbyists also prefer to go with wooden houses, mainly because it has two design features that help attract them. The first one is that wooden houses can be lowered or raised vertically without making it tip over. Secondly, the nesting spaces inside are easily accessible, which allows a person to remove any unwanted pests or other species of birds. This also allows the houses to be monitored without disturbing or damaging the nests.

PVC Plastic Houses:

For the first time their hobbyist, going with the plastic houses will be the perfect and cheapest way to start off your Bird’s colony. PVC houses are made out of hard plastic that is durable and pleasant to look at. They are also extremely easy to assemble and provide UV protection.

Gourds:

Bird house gourds have always been popular among Purple’s hobbyists. Today, you can easily grow natural gourds in your backyard with proper information. The advantage of having a gourd is that they do not attract other bird species like sparrows or starlings that can cause problems for the Purple martin colony.

Gourds are usually painted white to reflect heat and provide a cool environment for them to nest in. Plastic gourds enable the owners to access inner reaches of purple martin houses by way of a movable vent cap and extra access entrances for regular clean-ups and nest checks.

Most of the Purple Martin houses have Starling or round openings, door plugs, front porches and internal predator guards. By carefully reading and understanding the importance of getting the right kind of housing you can ensure that the Birds will come to nest in your colony every year.